To enter a symbol

1When you enter text, select Options > Add symbol.

2Scroll to a symbol and select Insert.

To enter text using T9™ Text Input

1From standby select, for example, Menu > Messaging > Write new > Message.

2If is not displayed, press and hold

down to change to T9 Text Input.

3Press each key only once, even if the letter you want is not the first letter on the key. For example, to write the word

“Jane”, press , , , . Write the whole word before looking at the suggestions.

4Use or to view suggestions.

5Press to accept a suggestion.

To enter text using multitap

1From standby select, for example, Menu > Messaging > Write new > Message.

2If is displayed, press and hold down to change to multitap text input.

3Press – repeatedly until the desired letter appears.

4When a word is written, press to add a space.

18Getting started

Multitap input only applies when latin characters are selected as input language.

To add words to the built-in dictionary

1When you enter text using T9 Text Input, select Options > Spell word.

2Write the word using multitap input and select Insert.

Entering text - Zi text input

You can use multitap text input or Zi™ text input to enter text. The Zi text input method uses a built-in dictionary.

By using the Zi text input you only have to press each key once. Continue writing a word even if it appears to be wrong.

To enter text using Zi text input

1For example, to write the word “Jane”,

Press , , , .

2You now have several options:

•If the word shown is the one you

want, press to accept and add a space. To accept a word without adding a space, press .

•If the word shown is not the one you

want, press or repeatedly to view alternative words. To accept

a word and add a space, press .

•To enter full stops and commas, press

and then or repeatedly.

This is an Internet version of this publication. © Print only for private use.