Entering text

You can use multitap text input or T9™ Text Input to enter text. The T9 Text Input method uses a built-in dictionary.

To change text input method

•When you enter text, press and hold

down .

To shift between capitals and lower-case letters

•When you enter text, press . To enter numbers

•When you enter text, press and hold

down – .

To enter full stops and commas

•When you enter text, press .

To enter a symbol

1When you enter text, select Options > Add symbol.

2Scroll to a symbol and select Insert.

To enter text using T9™ Text Input

1From standby select, for example, Menu > Messaging > Write new > Text message.

2If is not displayed, press and hold

down to change to T9 Text Input.

3Press each key only once, even if the letter you want is not the first letter on the key. For example, to write the word

“Jane”, press , , , . Write the whole word before looking at the suggestions.

4Use or to view suggestions.

5 Press to accept a suggestion.

To enter text using multitap

1From standby select, for example, Menu > Messaging > Write new > Text message.

2Ifis displayed, press and hold down

to change to multitap text input.

3 Press – repeatedly until the desired letter appears.

4When a word is written, press to add a space.

Multitap input only applies when Latin characters are selected as input language.

To add words to the built-in dictionary

1When you enter text using T9 Text Input, select Options > Spell word.

2Write the word using multitap input and select Insert.

Getting started

17

This is the Internet version of the User guide. © Print only for private use.