•Data rate – select the speed you want for the connection.
•Dial type – select analogue or ISDN connection.
To create a data account manually
1.Scroll to Connectivity, YES, Data comm., YES, Data accounts, YES, Add account?, YES.
2.Select an account type for access.
3.Enter a name for the data account.
4.Enter the settings that you have received from your network operator or service provider.
Confirm each setting by pressing YES.
5.Scroll to Save?, YES.
To edit a data account
1.Scroll to Connectivity, YES, Data comm., YES, Data accounts, YES.
2.Select a data account, YES.
3.Select Edit.
4.Select the setting you want to edit, YES. Edit the setting, YES.
5.Repeat step 4 for other settings you want to edit.
Preferred service
You can set GPRS or GSM as the preferred service.
40 Setting up WAP
Note: To see the status of GPRS coverage and connection, in standby, look at the triangle above the signal strength indicator. If the triangle is filled GPRS is available, otherwise it is not.
To select preferred mode
Scroll to Connectivity, YES, Data comm., YES, Pref. service, YES, and select GPRS and GSM or GSM only.
WAP profile settings
The WAP settings are stored in a WAP profile. In most cases you only need to use one profile to access the Internet.
You set up and use additional WAP profiles, for example, when accessing secure Internet sites, such as a banking site or a corporate intranet. You then simply switch between profiles when you need to change the network connection.
To enter WAP profile settings manually
1.Make sure you have a data account set up between your phone and the Internet server, as described in “Data account settings” on page 38.
This is the Internet version of the user's guide. © Print only for private use.