SoundGate manual Chrysler, Dodge, CRZNAUX2 Overview

CRZNAUX2

Purpose

The SoundGate CRZNAUX2 lets you connect a ZuneTM digital media player directly to the factory radio in the Chrysler Corporation vehicles listed below. The CRZNAUX2 supplies power, charges, and provides direct audio input for your Zune Device

Features The SoundGate CRZNAUX2 utilizes sophisticated microprocessor

control, ultra-reliable surface-mount construction, and advanced software design to flawlessly integrate with Chrysler audio systems. Your Zune device’s audio can be selected from your factory radio’s controls. An optional remote control (sold separately) allows control of all Zune device functions.

The CRZNAUX2 works in the following vehicles:

CHRYSLER		DODGE (CONTINUED)
300M	1999–2004	Neon / SRT	2000–2005
Concorde	1998–2004	Ram Pickup 1500/2500/3500	2002–2005
LHS	1999–2003	Stratus	2001–2005
PT Cruiser	2000–2005	JEEP
Sebring	2001–2006	Grand Cherokee	1999–2004
Town and Country Van	2001–2006	Liberty	2002–2005
DODGE		Wrangler	2003–2005
Dakota	2001–2004	PLYMOUTH
Durango	2001–2003	Prowler	2002
Grand Caravan	2001–2006
Intrepid	1998–2004

If you experience problems, call SoundGate Technical Support	www.soundgate.com
at +1-800-256-0808, or email us at sgtech@soundgate.com.	Rev 20080404

WARNING

DO NOT DISASSEMBLE OR ALTER

Doing so may result in an accident, fire, or electric shock. Do not block your view

Do not mount product or any added audio/video equipment where it can block your view through the windshield or block your view of dashboard indicators and displays.

Do not block safety devices

CAUTION

DO NOT ALLOW CABLES TO BECOME ENTANGLED IN SURROUNDING OBJECTS

Cables or wiring that obstruct or get caught on places such as the steering wheel, shift lever, brake pedals, etc. can be extremely hazardous.

DO NOT INSTALL IN LOCATIONS WITH HIGH MOISTURE OR DUST

Moisture or dust may result in product failure.

HAVE THE WIRING AND INSTALLATION DONE BY EXPERTS

The wiring and installation of this product requires special technical skills and experience.

USE ONLY SPECIFIED ACCESSORY PARTS

Use of other than specified parts may damage product internally.

FOLLOW THE OPERATIONAL AND INSTALLATION MANUALS.

YOU SHOULD READ AND FAMILIARIZE YOURSELF THOROUGHLY WITH THE FOLLOWING INFORMATION PRIOR TO INSTALLING AND USING THIS UNIT. IN ADDITION, YOU MUST CAREFULLY READ AND FOLLOW THE INSTALLATION SCHEMATICS AND INSTRUCTIONS FOR THE PRODUCT AND THE VEHICLE IN WHICH IT IS BEING INSTALLED. FAILURE TO FOLLOW INSTALLATION INSTRUCTIONS MAY DAMAGE THE PRODUCT AND THE VEHICLE, WILL VOID THE PRODUCT WARRANTY, AND MAY VOID THE VEHICLE WARRANTY.

CHECK YOUR LOCAL LAWS

Some States/Provinces or other governmental jurisdictions (such as cities) may have laws that prohibit the operation of a video screen within the sight of the driver. If you have purchased such a product, you should use the product only in locations where it is legal to do so, and if you do use the product, set up the screen so it is only visible to passengers.

TROUBLESHOOTING

Should this product fail to operate properly, please contact your Dealer or SoundGate Technical Support via email at sgtech@soundgate.com or via phone at +1-800-256-0808.

CRZNAUX2 Overview

RCA component A/V outputs. Connect the audio outputs to the matching locations of the CRZNAUX2 components on the next page.

Yellow = Video

Red = Audio Right

White = Audio Left

Zune Dock Connector. Connect to

ZuneTM digital media player.

Connect the RCA Left (white) and Right (red) audio cables (from the component-set on page 2) to the CRZNAUX2 module.

CRZNAUX2 Module CRZNAUX2 Harness Option B 8-pin Male DIN Connector and +12V Constant Wire. Only one of the harnesses shown should be used. See the instructions on page 4 for installation details.

Do not mount product or any added audio/video equipment where it can obstruct the operation of any safety device, such as the airbag.

Distraction warning

Do not allow product or any added audio/video equipment to distract you while you are driving.

BEFORE WIRING, DISCONNECT THE CABLE FROM THE NEGATIVE BATTERY TERMINAL

Before starting any installation work , wait 90 seconds after turning the ignition switch to the LOCK position and disconnecting the negative (-) terminal from the battery. The supplemental restraint system (SRS), or airbag(s) is equipped with a backup power source. If installation work is started less than 90 seconds after disconnection of the negative (-) battery terminal, the SRS may deploy. When the negative (-) terminal cable is disconnected from the battery, the clock and audio systems’ memory may be erased. Before starting installation work, make a record of the clock and audio systems’ memory settings. When installation is complete, reset the clock and audio systems to their previous settings. Power tilt, power telescopic steering column, power seats, power mirrors, power shoulder belt anchorage, and other power accessories may or may not be equipped with a memory function; consider keeping a record of these settings as well.

When installation is complete, readjust the features to their previous settings.

Never use a backup power supply (such as another battery) during installation work in an attempt to avoid losing these memory settings.

Optional remote control (available separately). Allows full control of a connected Zune device’s functions.

Power connector. Connect black wire to bare- metal chassis. Connect red wire to a +12V switched (ignition) power source.

Inline fuse. The red wire of the power connector is fused to protect your Zune device and vehicle systems. This wire requires a 12V, 1500mA fuse.

2 3