6
2. Push the panel to the left and then pull it towards
you (pic. 2).
Attaching the control panel
1. Insert the left side of the control panel into the main unit (pic. 3).
Note: the control panel must be attached into the T-Joint.
2. Press the right side of the control panel until a “click” sound is
heard.
3. Close the panel.
Caution:
DO NOT insert the control panel from the right side. It can damage the control panel.
The control panel can easily be damaged by shocks. After
removing it, place it in a protective case and be careful not
to drop it or subject it to strong shocks.
The rear connector that connects the main unit and the control panel is an extremely
important part. Be careful not to
damage it by pressing on it with fingernails, pens, screwdrivers, etc.
Note:
If the control panel is dirty , wipe off the di rt with soft, d ry cloth only. A nd use a cotton swa b
soaked in isopropyl alcohol to clean the socket on the back of the control panel.
Pic. 3