Soundstream Technologies 110.2 Passive and Electronic Crossovers, XXX LOW 81 High Pass Diagrams

PASSIVE AND ELECTRONIC CROSSOVERS

Your Granite amplifier is capable of driving a complete subwoofer and satellite system in the Mixed Mono configuration. However, for the lowest distortion and the maximum output and sound quality, we recommend you use electronic crossovers and multiple channels of amplification. The Granite 110.2 amplifier incorporates an electronic crossover with outputs. This amplifier, in conjunction with another amplifier, will competently drive an entire bi-amplified system.

If you plan to use the Granite 110.2 in the Mixed Mono configuration, it is important to use the appropriate passive crossovers. Below are charts for 6 and 12 dB/octave crossovers.

6 dB/octave Passive Crossover Chart

Key: L = high quality (DCR ~1 Ohm) inductor/coil

C= non-polarized 50 V (or greater) capacitor

XXX LOW 81 HIGH PASS DIAGRAMS XXX

I 2 Ohms I 4 Ohms I 8 Ohms

FREQ 1 L C L C L C