Soundstream Technologies 300SX Wiring Diagram, Internal, oaoo, Power And Ground, Signal Cable

WIRING

POWER AND GROUND

To ensure maximum output from your REFERENCE amplifier, use high quality, low-loss power and ground cables. The REFERENCE amplifiers will accept up to 4 gauge or 8 gauge power and ground cables. Determine from the chart below the minimum gauge power and ground wire for your application.

up fO20’

CIRCUIT BREAKERS/FUSES

EXTERNAL

Like all audio components, the REFERENCE amplifiers must be fused near the battery A fuse or circuit breaker must be located within 18” of the battery This will prevent a fire in the event of a shorted cable. See the chart below to determine the correct fuse value.

INTERNAL

The REFERENCE amplifiers are fused with automotive-type fuses. In the event of blown power supply fuses, the “Fault” indicator an the top panel will light. The fuses are accessible via a plastic plug on the bottom of the amplifier. See

the chart below to determine the fuse value. Never replace the luaes with a higher value than what Is aupplled. This may resufl In ampliller damage

and will void the warranty!

REFERENCE Amplifier Fuse Values

Ampllfler	Amplifier Fuse	Battery Fuse
REFERENCE3GUsx	30 amp automotive	50 amp

12

• oaoo

REMOTE NRN-ON

Connect the “Remote” to the turn-on leadlrom the source unit When +12 ~011s is received, the amplifier will turn on.

SIGNAL CABLE

Use a high-quality cable that will be easy to install and has minimal signal loss to guarantee optimum periormance. Soundstream’s DL.l and SL.1 are ideal.

SPEAKER CABLE

The REFERENCE amplifiers will accept up to 8 gauge speaker cable. Use a high quality, flexible, multi-strand cable for best perlormance and longevity. Soundstream Speaker120 & 160 (12 and 16 gauge) are ideal.

WIRING DIAGRAM

13