Soundstream Technologies EXC.4, EXC.5, EXC.6 WIRING

WIRING

EXC System Wiring Diagram

Figure 8 shows a diagram illustrating the wiring of the EXC Component Speake

System. It is important to make sure that all connections are in phase; that is positive (+)

is connected to positive (+), and negative (-) is connected to negative (-), since an out-of-

phase connection will cause a dislocated image and low bass output. We suggest using

a minimum of 16 gauge (ideally 12 gauge) premium cable. The connectors provided with

this system will accommodate wire from 12 gauge to 16 gauge.

FIGURE 8

Contents

Main Component Speaker System 2 EXC DESIGN FEATURES EXC Midrange / Woofe r EXC Soft Dome Neodymium Tweete C r LOCATION AND MOUNTING 3 INSTALLING THE EXC TWEETER TWEETER SURFACE MOUNTING TWEETER ANGLE MOUNTING INSTALLING THE EXC MIDRANGE- WOOFER Page WIRING NOTES ON BI-AMPING Page SPECIFICATIONS EXC Midrange/Woofer EXC Soft Dome Neodymium Tweeter 10