Kev to Callouts
1.+12V - Connected to fuse or circuit breaker, then battery’s positive post.
2.Ground Main ground connection. Bolt to a clean chassis ground in the vehicle.
3.Remote Remote
4.Speaker Output Connections Channels 1 & 2.
5.Speaker Output Connections Sub Channels.
6.Speaker Output Connections Channels 3 & 4.
7.Inputs Right and left channel inputs for channels 1 8 2.
8.Crossover Adjustment Pot - Crossover frequency setting for the channels 1 8 2 high pass filter.Subwoofer Crossover Switch Select “IN”to use the amplifier’s internal low pass filter, or uOUT” to use an external crossover.
9.Crossover Adjustment Pot Crossover frequency setting for the subwoofer low pass filter.
10.LED Indicates amplifier power on.
11.Crossover Adjustment Pot - Crossover frequency setting for the channels 3 8 4 high pass filter. inputs Right and left channel inputs for channels 1 & 2 and the subwoofer.
12.Channels 3 & 4 input Select - Switches to allow all channels to be driven from 2 (CH 1 & 2) or 4 RCA inputs
13.inputs Right and left channel inputs for channels 3 8 4.
14.Channels 1 8 2 Crossover Switch - Select “IN” to use the amplifier’s internal high pass filter. or ‘“OUT” to bypass the internal crossover.
15.Input Level
16.Input Level - Variable from 40mV to
17, Input Level
18Channels 3 & 4 Crossover Switch - Select “IN” to use the amplifier’s internal high pass filter, or “OUT” bypass the internal crossover.