Source Technologies ST9630 Copyright , Notice

Source Technologies, LLC ST9630 Secure MICR Printer User’s Guide

Copyright

No part of this document may be reproduced or utilized in any form or by any means,

electronic or mechanical, including photocopying, recording, or by any information

storage and retrieval system, without permission in writing from Source Technologies,

LLC.

Published in the United States of America by:

Source Technologies, LLC

2910 Whitehall Park Drive

Charlotte, NC 28273

Author: Source Technologies, LLC

Notice

This manual serves as a reference for a Source Technologies Secure MICR Printer.

This manual should be used as a reference for learning more about MICR technology

and developing MICR printing applications. This guide was produced to assist IS

Technicians and Engineers in the integration of Source Technologies’ programmed

printers with their custom MICR applications. The guide also contains information on

MICR related error messages that post to the operator panel.

To the best of our knowledge, the information in this publication is accurate: however,

neither Source Technologies, LLC nor its dealers or affiliates assume any responsibility

or liability for the accuracy or completeness of, or consequences arising from, such

information. Changes, typos, and technical inaccuracies will be corrected in subsequent

publications. This publication is subject to change without notice. The information and

descriptions contained in this manual cannot be copied, disseminated, or distributed

without the express written consent of Source Technologies, LLC. This document is

intended for informational purposes only. Mention of trade names or commercial

products does not constitute endorsement or recommendation for use by Source

Technologies, LLC. Final determination of the suitability of any information or product for

use contemplated by any user, and the manner of that use is the sole responsibility of

the user. We recommend that anyone intending to rely on any recommendation of

materials or procedures mentioned in this publication should satisfy himself as to such

suitability, and that he can meet all applicable safety and health standards.

All trade names or products used in this manual are for identification purposes only and

may be trademarks or registered trademarks of their respective companies.

Document Number: 104506