Source Technologies, LLC ST9650 Secure MICR Printer User’s Guide
44
7. IBM Host Programming Features and Examples

Hex Transfer

The Hex Transfer feature allows the user to send PCL escape sequence printer
commands to the printer with simple text strings. You may send any valid command or
string of commands with no limit on the length or complexity. Form macros, signatures,
or simple commands may be passed through any platform to the printer since they are
simple text. The printer will convert them back to ESC (escape) sequences when they
arrive at the printer. Hex Transfer is automatically enabled while in MICR Mode. To
enable it for all applications use the following commands:
Turning Hex Transfer On
To enable Hex Transfer, send the following command:
&&??&%
Once Hex Transfer is enabled, the character sequence &% will act as a trigger
sequence. Any data following these trigger characters will not be printed and will be
treated as Hex Transfer data until the Hex Transfer ending character $ is encountered.
Turning Hex Transfer Off
To turn Hex Transfer off, send the following command:
&&??!!
This command will clear the trigger sequence and allow the &% characters to print. This
clear command may be sent at any time to assure that Hex Transfer is disabled. When
MICR Mode is entered, Hex Transfer will automatically be turned on, and when MICR
Mode is exited, Hex Transfer will be turned off unless it has previously been activated
outside of MICR Mode with the &&??&% string.
IBM Host Programming Features and Examples | 7