Source Technologies STM.57W specifications Peripherals Connection, Wifi802.11b/g Connection

When the printer is installed initially or when you face a problem, you can run the self test and check the information about

-Control Circuit, Mechanism, Print Quality, ROM Version

After checking with self-test and no issues are found, you can examine other devices and software. This function is working independent of devices and software.

●Motor protection from being overheated

The motor should be stopped and cooled about more than 30 seconds after continuous printing 1.5 meter

4. Peripherals Connection

This product can communicate with other devices via Wifi(802.11b/g) communication and cable.

4-1 Wifi(802.11b/g) Connection

1.The Printer can be connected to devices equipped with wifi(802.11b/g) communication capacity (PDAs, PCs, etc.)

2.Use the wifi(802.11b/g) connection function supported by the device to connect to the printer.

NOTE

Refer to the wifi(802.11b/g) Manual for more details on connection.

16 17