EPSON ActionNote 700 Series

Physical Dimensions

LEDs

+Power-Green = power is on; Yellow = battery is low;

Red = battery is very low, save data;Red blinking = system is in Suspend mode8Hard disk drive-Computer is accessing the hard disk drivelr Num Lock-Num Lock is on, which activates the embedded numeric keypadf3 Scroll Lock-Scroll Lock is onAa Caps Lock-Caps Lock is ona DC-IN-Yellow = power is supplied by the adapter and the battery is charging;

Green = battery is fully charged; Red = battery is too hot or too cold; Blinking red = battery is installed incorrectly

or is damaged.

Accessories

Ll Lightweight AC adapterLl Carrying case

Optional Equipment

0 4MB memory expansion moduleCl 16MB memory expansion moduleCl External keyboardCl External numeric keypadCl Additional NiMH battery packsCl Extra AC adapter0 Enhanced, fast-charging AC adapterCl Adapter for an automobile cigarette lighter

Cl PCMCIA Type II cards including modems, flash RAM, RAM, fax/modems, LAN cards, etc.

tl 260MB and higher capacity hard disk drive upgradesWhen traveling by airplane, take the computer into the

Adding Memory

The ActionNote 700 Series comes with 4MB of memory on the system board. You can increase the memory to 8MB by installing a 4MB memory module, or to 20MB by installing a 16MB memory module.

To install the memory module, press the keyboard forward and lift the front of the keyboard until it tilts back to rest against the LCD screen.

Locate the three sockets near the center front of the board. Align the three connectors on the memory module with the three sockets on the system board; then press it firmly into place.

sockets

Replace the keyboard; then run Setup to make sure the computer recognizes the new amount of memory.

System Board Major Components

The following table lists the major components on the system board.

System board major components

4/94EPSON ActionNote 700 Series-3