Initiating a call from your Headset
Depending on your mobile phone, you
may be able to initiate phone calls from your Headset (your phone will need to support voice dialling).
To activate, briefly press the
Low Battery Warning
The Headset will produce a warning tone when the battery has only 10% charge re- maining.
To visually indicate this, the Headset In- dicator Light will flash red rather than RED green.
Resetting your Headset
Should your Headset stop responding the battery may require charging. If this fails to reactivate your Headset, try the following steps:
1.Place your Headset inside the charger.
2.Briefly disconnect the power suppl y from the charger (the power connector to the docking station must be completel y removed).
3.Reconnect the power suppl y to the charger.
4.Remove your Headset from the charger.
Your Headset should now function again as nor- mal.
Please Note:
Volume and pairing settings may be lost during a reset process.