
SY-6KE Quick Start Guide
Step 3. Configure Memory
Your board comes with three DIMM sockets, providing support for up to 384MB of main memory using DIMM modules from 8MB to 128MB with no restriction on memory configuration. Therefore, you can install memory modules in any combination.
For 66MHz front side bus CPUs use 12ns or faster memory.
Memory Configuration
MEMORY |
| DIMM Banks |
| |
CONFIGURATION | DIMM 1 | DIMM 2 | DIMM 3 | |
| ||||
RAM Type | EDO/SDRAM | EDO/SDRAM | EDO/SDRAM | |
RAM Module Size | 8/16/32/64/128 | 8/16/32/64/128 | 8/16/32/64/128 | |
(MB) | ||||
|
|
|
Notice 1: Only install 3.3V EDO DIMM modules on this mainboard; other voltages are not supported by the
Notice 2: Do not install EDO types of DIMM when you already use SDRAM.
Step 4. Set the CPU Frequency
You do not need to set any jumper for the CPU frequency. Instead, CPU setting are changed through the BIOS [CHIPSET FEATURES SETUP]. Please refer to Chapter 3 - Quick BIOS Setup for details on how to set the Pentium® II processor frequency.
Hardware | Installation |
Step 5. Enable/Disable PS/2 Keyboard Wake-Up (JP10)
You can choose to enable the
Support
by Keyboard
JP10 Setting
Enable |
|
|
|
|
|
|
|
|
|
|
|
Enable |
|
|
|
|
|
by Keyboard or |
|
|
|
|
|
|
|
|
|
| |
Mouse function |
|
|
|
|
|
1 2 3 |
| ||||
(short pin |
|
|
|
|
|
Disable* (*Default)
Disable
Mouse function 1 2 3 (short pin
9