SY-K7VMPQuick Start Guide

CMOS Clear (JP5)

In some cases the CMOS memory may contain wrong data, follow the steps below to clear the CMOS memory.

1.Clear the CMOS memory by momentarily shorting pin 2-3 on jumper JP5. Its white cap can easily identify this jumper.

2.Put the jumper back to 1-2 to allow writing of new data into the CMOS memory.

 

CMOS Clearing

Clear CMOS Data

 

Retain CMOS Data

 

 

 

 

 

 

 

 

 

Short pin 2-3 for

 

Short pin 1-2 to

 

 

JP5 Setting

at least 5 seconds to

 

 

 

 

retain new settings

 

 

 

clear the CMOS

 

 

 

 

 

 

 

 

 

 

 

 

 

Note: You must unplug the ATX power cable from the ATX power connector when performing the CMOS Clear operation.

On-board Speaker connection

When using 2-channel speaker, connect the speaker cable to Line-out.

If you’re using 4 channel speaker, connect the front L/R speakers to Line-out and rear L/R speakers to Line-in. Make sure that the audio software is set for 4 channel speaker system.

If you are using 6 channel speaker, connect the front L/R speakers to Line-out and the rear L/R speakers to Line-in. Connect the Center/Bass to Mic-in.

Line-in

Line-out

Mic-in

17

Installation

Page 17
Image 17
SOYO SY-K7VMP quick start Cmos Clear JP5, On-board Speaker connection, Cmos Clearing

SY-K7VMP specifications

The SOYO SY-K7VMP motherboard is a classic piece of hardware from the early 2000s that gained attention for its advanced features and compatibility with the AMD Athlon and Duron processors. Designed for users looking for robust performance and reliability, the SY-K7VMP offered several technologies and characteristics that made it a popular choice among computer builders at the time.

One of the primary features of the SY-K7VMP is its support for the AMD Socket A, accommodating processors with a front-side bus (FSB) speed of up to 200 MHz, enabling users to harness the full potential of their CPUs. With a chipset based on the VIA KT133A, the SY-K7VMP provided a balanced approach to performance and stability, making it suitable for both home and office environments.

The motherboard supported up to 1GB of SDRAM through its three DIMM slots, allowing users to enhance multitasking capabilities and improve overall system responsiveness. The SY-K7VMP supported various RAM speeds ranging from PC-100 to PC-133, providing flexibility for users to select the memory that best suited their performance needs.

In terms of storage options, the SY-K7VMP featured an integrated IDE controller that supported up to four ATA/100 devices, which allowed for faster data transfer rates and improved hard drive performance. This was crucial at a time when data storage demands were rapidly increasing with the introduction of larger hard drives.

Another highlight of the motherboards was its integrated AC'97 audio, which eliminated the need for a separate sound card for basic audio needs. This feature catered to casual users who needed standard audio capabilities without additional costs. Furthermore, the SY-K7VMP was equipped with multiple expansion slots, including AGP and PCI slots, enabling users to add graphics cards, additional sound cards, or network cards as needed.

The SY-K7VMP also placed an emphasis on connectivity, featuring onboard LAN support for internet access, which was becoming increasingly essential for users. Overall, the SOYO SY-K7VMP motherboard offered a compelling combination of features, performance, and expandability.

While it may be considered outdated by modern standards, the SY-K7VMP remains a testament to the evolution of computing hardware and the demands of users during its time in the spotlight.