SY-P4I845PEISA/GEISA Quick Start Guide
14
Hardware
Installation
Audio Speakers connections
When using 2-channel speaker, connect the speaker cable to line-out.
If you’re using 4 channel speaker, connect
the front L/R speakers to line-out and rear
L/R speakers to Line-in
. make sure to set the audio software for 4 channel speaker
system. Do not forget to set the Audio Rack software to 4-channel system.
If you are using 6 channel speaker, connect the front L/R speaker to line out, rear L/R
speaker to line-in and center/Bass speaker to Mic-in, make sure to set the audio software
for 6 channel speaker system.
Onboard LAN LED Definition
Line-out Line-in Mic-in
When this LED is lit, this
means the LAN is running
at 100 mbps, if it is not lit,
the Onboard LAN is
working at 10 mbps.
This is the LAN activit
y
LED.
It will blink when it is active.