Spalding 211696 manual Section C Apply Height and Moving Label & Securing System

SECTION C: APPLY HEIGHT AND MOVING LABEL & SECURING SYSTEM

1.Carefully upright assembly. Apply moving system label (46) to front of pole as shown. Regulation rim height is 10 feet (3.05 m).

10 ft.

(3.05 m)

46

WARNING!

TWO PEOPLE REQUIRED FOR THIS PROCEDURE. FAILURE TO FOLLOW THIS WARNING COULD RESULT IN SERIOUS INJURY AND/OR PROPERTY DAMAGE.

WARNING!

DO NOT LEAVE ASSEMBLY UNATTENDED WHEN EMPTY; IT MAY TIP OVER.

DO NOT ALLOW CHILDREN TO ADJUST HEIGHT.

2.Place assembled unit in desired location. Fill tank with water (30 gallons/114 liters) or sand (360 lb./163 kg) and snap tank cap (47) in place.

Insert T-strap (48) through slot on back of base as shown. Secure unit to ground by twisting tie down stake (49) into ground and hooking T-strap (48) onto tie down stake (49).

		48
	47	13
47	48
		13
P/N 211696	07/03	26