Spalding 211948C manual Pole Sections

3. IMPORTANT! Center alignment slot of middle pole section (2) in a lower hole of top pole section (1) as shown. While maintaining alignment, bounce pole top (1) and middle section

(2)together as shown until they no longer move toward taped reference mark. Upright assembly.

NOTE:

POLE SECTIONS

SHOULD HAVE A

3-1/2" (9 CM)

MINIMUM OVERLAP.

WOOD SCRAP

(NOT SUPPLIED)

2

1

4. IMPORTANT! Center alignment slot of lower pole section (3) in a lower hole of middle pole section (2) as in step 3. While maintaining alignment, bounce assembly and lower pole section

(3)together as shown until they no longer moved toward taped reference mark.

NOTE:

POLE SECTIONS

SHOULD HAVE A

3-1/2" (9 CM)

MINIMUM OVERLAP.

1

2

3

WOOD SCRAP

(NOT SUPPLIED)

P/N 211948C 01/04 12