17. After pole has been secured to plate (2) loosen nut (25), remove cotter pin (37), and pull out pin (36). This will allow the removal of the assembly bolt (14) which is no longer necessary for the remainder of the assembly and installation of system.

WARNING: ONLY AFTER NUTS (24) HAVE BEEN FULLY TIGHTENED:

Remove cotter pin (37) and pin (36) to remove assembly bolt (14) from bottom plate (2).

25

24

35

14

37

36

17

05/05

ID# M866041

Page 17
Image 17
Spalding manual 05/05 ID# M866041