SpeakerCraft CINEMA SUB 12, CINEMA SUB 8, 10 Safety Instructions, Explanation of Graphical Symbols

SAFETY INSTRUCTIONS

CAUTION: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servic- ing to qualified service personnel.

• Explanation of Graphical Symbols

The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert you to the presence of uninsulated “dangerous voltage” within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons.

APPLICABLE FOR USA, CANADA OR WHERE APPROVED FOR USAGE

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE PLUG TO WIDE SLOT, INSERT FULLY.

ATTENTION: POUR EVITER LES CHOCS ELECTRIQUES, INTRODUIRE LA LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE CORRESPONDANTE DE LA PRISE ET POUSSER JUSQU AU FOND.

The exclamation point within an equilateral triangle is intended to alert you to the presence of important operating and maintenance (servicing) instructions in the literature accompanying the appliance.

1.Read Instructions - All the safety and operating instructions should be read before the appliance is operated.

2.Retain Instructions - The safety and operating instructions should be retained for future reference.

3.Heed Warnings - All warnings on the appliance and in the operating instructions should be adhered to.

4.Follow Instructions - All operating and other instructions should be followed.

5.Water and Moisture - To reduce the risk of electric shock, do not expose this apparatus to rain or moisture –­ for example, near a bathtub, washbowl, kitchen sink, laundry tub, in a wet basement, or near a swimming pool, etc.

6.Carts and Stands - The appliance should be used only with a cart or stand that is recommended by the manufacturer.

PORTABLE CART

WARNING

10.Power Source - The appliance should be connected to a power supply only of the type described in the operating instructions or as marked on the appliance.

11.Power-Cord Protection - Power-supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, pay- ing particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.

12.Cleaning - The appliance should be cleaned only as rec- ommended by the manufacturer.

13.Non use Periods - The appliance coupler shall remain readily operatable. The appliance coupler should be disconnected from the apparatus when left unused for a long period of time.

14.Object and Liquid Entry - Care should be taken so that objects do not fall into and liquids not spilled into the inside of the appliance.

15.Damage Requiring Service - The appliance should be ser- viced by qualified service personnel when:

a.The power-supply cord or the plug has been dam aged; or

b.Objects have fallen onto, or liquid has been spilled into the appliance; or

c.The appliance has been exposed to rain; or

7.Wall or Ceiling Mounting - The appliance should be mount- ed to a wall or ceiling only as recommended by the manu- facturer.

8.Ventilation - The appliance should be situated so that its location or position does not interfere with its proper venti- lation. For example, the appliance should not be situated on a bed, sofa, rug, or similar surface that may block the ventilation openings; or placed in a built-in installation, such as a bookcase or cabinet that may impede the flow of air through the ventilation openings.

9.Heat - The appliance should be situated away from heat sources such as radiators, stoves, or other appliances that produce heat.

d. The appliance does not appear to operate normally or exhibits a marked change in performance; or

e. The appliance has been dropped, or the cabinet damaged.

16.Servicing - The user should not attempt to service the appliance beyond those means described in the operat- ing instructions. All other servicing should be referred to qualified service personnel.

17.Grounding or Polarization - The precautions that should be taken so that the grounding or polarization means of an appliance is not defeated.

1