SPECIFICATIONS

 

CRS3

Speaker Type:

Small Footprint In-Ceiling

Woofer:

3" Full Range Aluminum Cone Woofer

Impedance:

8 Ohms

Sensitivity:

86dB 1W/1m

Frequency Response:

80Hz - 16kHz

Power Handling:

40 watts

Cut Out Dimensions:

4 1⁄4"

 

(108mm)

Dimensions (Diameter x Depth):

5 1⁄8" x 3 1⁄4"

 

(130mm x 83mm)

In our attempt to constantly improve our products, features and specifications are subject to change without notice.

LIMITED LIFETIME WARRANTY

SpeakerCraft Inc. warrants to the original retail purchaser only that this SpeakerCraft product will be free from defects in materials and workmanship, provided the speaker was purchased from a SpeakerCraft Authorized Dealer.

Defective products must be shipped, together with proof of purchase, prepaid insured to the SpeakerCraft Authorized Dealer from whom they were purchased, or to the SpeakerCraft factory at the address listed on this installation instruction manual. Freight collect shipments will be refused. It is pref- erable to ship this product in the original shipping container to lessen the chance of transit damage. In any case, the risk of loss or damage in transit is to be borne by the purchaser. If, upon examination at the Factory or SpeakerCraft Authorized Dealer, it is determined that the unit was defective in materials or workmanship at any time during this warranty period, SpeakerCraft or the SpeakerCraft Authorized Dealer will, at its option, repair or replace this product at no additional charge, except as set forth below. If this model is no longer available and can not be repaired effectively, SpeakerCraft, at its sole option, may replace the unit with a current model of equal or greater value. In some cases where a new model is substituted, a modification to the mounting surface may be required. If mounting surface modification is required, SpeakerCraft assumes no responsibility or liability for such modi- fication. All replaced parts and product become the property of SpeakerCraft Inc. Products replaced or repaired under this Warranty will be returned to the original retail purchaser, within a reasonable time, freight prepaid.

This Warranty does not include service or parts to repair damage caused by accident, disaster, misuse, abuse, negligence, inadequate packing or shipping procedures, commercial use, voltage inputs in excess of the rated maximum of the unit, or service, repair or modification of the product which has not been authorized or approved by SpeakerCraft. This Warranty also excludes normal cosmetic deterioration caused by environmental conditions. This warranty will be void if the Serial Number on the product has been removed, tampered with or defaced.

This Warranty is in lieu of all other expressed warranties. If the product is defective in materials or workmanship as warranted above, the purchaser’s sole remedy shall be repair or replacement as provided above. In no event will SpeakerCraft be liable for any incidental or consequential damages arising out of the use or inability to use the product, even if SpeakerCraft Inc. or a SpeakerCraft Inc. Authorized Dealer has been advised of the possibility of such damages, or for any claim by any other party. Some states do not allow the exclusion or limitation of consequential damages, so the above limitation and exclusion may not apply.

All implied warranties on the product are limited to the duration of this expressed Warranty. Some states do not allow limita- tion on the length of an implied warranty. If the original retail purchaser resides in such a state, this limitation does not apply.

SpeakerCraft offers a variety of accessories to make your installation of this and other SpeakerCraft products easy, economical, and professional. Contact your authorized SpeakerCraft Dealer for more information. For technical inquires, please call 1-800-448-0976 or e-mail us at techsupport@speakercraft.com. We are available to assist you every weekday, except holidays, between the hours of 7:00 a.m. and 5:00 p.m. PST.

940 Columbia Ave., Riverside CA 92507 USA (800) 448 0976 Fax (951) 787 8747 International +1 951 787 0543 www.speakercraft.com

LIT86300(Rev2)

Page 3
Page 4
Image 4
SpeakerCraft CRS3 owner manual Specifications, Limited Lifetime Warranty
Page 3

CRS3 specifications

The SpeakerCraft CRS3 is a standout component in the realm of high-performance audio solutions, specifically designed to deliver an immersive audio experience for both home theater and audio enthusiasts. Recognized for its exceptional sound quality and innovative engineering, the CRS3 embodies the hallmark of SpeakerCraft’s commitment to excellence in sound reproduction.

One of the most notable features of the CRS3 is its advanced audio technology. The speaker is equipped with a dedicated 3-way configuration that allows it to separate audio frequencies effectively. This configuration enhances clarity and dynamics across a range of frequencies, providing deep bass from its robust woofers, vivid midrange from specially designed cone drivers, and pristine high frequencies from its silk dome tweeters. This multi-faceted approach ensures that every note and detail in a soundtrack or music piece is delivered with stunning precision.

The CRS3 also incorporates SpeakerCraft's proprietary technologies, including enhanced dispersion patterns. This means that listeners can enjoy an expansive soundstage regardless of where they are seated in the room. The speaker’s wide dispersion allows audio to fill spaces uniformly, minimizing dead spots and providing an enhanced listening experience for everyone involved.

Another characteristic of the CRS3 is its elegant design. It sports a low-profile aesthetic that allows it to blend seamlessly with a variety of interior décors. The speaker can be easily mounted in-wall or in-ceiling, making it an ideal choice for those who prefer a clean, unobtrusive look while maintaining high-quality audio. The speaker's sleek grille can be painted to match the wall color, adding to the customization options for homeowners.

Durability and performance are also key characteristics of the CRS3. Constructed with high-grade materials, it provides longevity without sacrificing sound quality. The encapsulated components ensure that the speaker functions reliably in diverse environments, making it a suitable choice for both residential and commercial installations.

In conclusion, the SpeakerCraft CRS3 is an exemplary audio solution designed for those who value high-fidelity sound and aesthetic versatility. With its advanced 3-way configuration, proprietary technologies for sound dispersion, and durable, stylish design, it stands as a significant contributor to any audio setup, ensuring an outstanding listening experience that meets the needs of any audiophile or casual listener alike.
Top Page Image Contents