Specialized Era manual Misc Parts Installation

10 GUARD PINS

Long (31mm):

All SRAM derailleurs

All Shimano Shadow derailleurs

Medium (25mm):

Shimano XTR / XT / LX

(All Shimano derailleurs with countersunk hanger bolt)

Short (10mm):

(All Shimano derailleurs without

countersunk hanger bolt)

Derailleur Guard Installation (Q/R option):

1. Install rear derailleur on derailleur hanger.

2. Place rear wheel in frame and install Q/R, with springs and without Q/R end nut.

3. Insert appropriate derailleur guard pin in derailleur.

4. Place guard sleeve in derailleur guard.

5. Slide derailleur guard and sleeve over guard pin and Q/R.

6. Install supplied Q/R nut and tighten Q/R.

7. Torque guard pinch bolt to 80 in-lbf (9 N-m).

MISC PARTS INSTALLATION

The Specialized Derailleur guard is available separately through your local Specialized dealer. The guard works with solid or Q/R axle types and is compatible with all Mountain bike models using derailleur hanger #9895-4021. Guard Part #: 9896-4030

31

25

Downtube cable guide positions

Place offset oval spacer and small crescent shaped spacer in lower position for correct derailleur / chainring position.

11