Specialized Stumpjumper Adjustable Dropout manual Installation Guide, Grease

INSTALLATION GUIDE

SUBJECT: Stumpjumper Adjustable Dropout Installation

FROM: Engineering Department

DATE: 06/22/07

To ensure correct installation of the adjustable dropouts, please read and familiarize yourself with the following steps:

Please read the following instructions. If you have any doubt regarding your mechanical ability and/or installation of this product, visit your local authorized dealer. Specialized recommends that the dropouts be installed using a torque wrench, by a qualified mechanic.

1

2

GREASE

Stumpjumper Stumpjumper

Left Dropout Right Dropout

9898-4230 9898-4235

The bikes are equipped with one left and two right dropouts (with and without the derailleur hanger tab). After-Market dropouts are offered with the built-in derailleur hanger only and can be used with gears or as a single-speed dropout.

GREASE

Install the left and right dropouts. The threaded steel backing plates are side-specific and must match the correct side dropouts.

Do not tighten the dropout bolts yet, leave them 1/4 turn loose.

NOTE: Make sure the bolt threads and washers are greased.

3

4

Install the disc brake.

Install the rear wheel in the loose dropouts. Tightening the quick-release will self-align the wheel and dropouts.