CAUTION

 

 

 

 

 

 

 

 

 

 

 

 

RISK OF ELECTRIC SHOCK

 

 

 

 

 

DO NOT OPEN

 

 

 

 

 

 

 

 

 

 

 

CAUTION:TO REDUCE THE RISK OF ELECTRIC SHOCK

 

 

 

 

DO NOT REMOVE COVER(OR BACK).

 

 

 

 

NO USER-SERVICEABLE PARTS INSIDE.

 

 

 

 

REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.

 

 

 

 

 

 

 

 

 

 

 

ISO14001

 

 

 

The lightning flash with an arrowhead symbol, within an equilateral

 

 

triangle is intended to alert the user to the presence of uninsulated

 

 

dangerous voltage within the product's enclosure that may be of

 

 

sufficient magnitude to constitute a risk of electric shock to persons.

 

 

The exclamation point within an equilateral triangle is intended to alert

 

 

the user to the presence of important operating and maintenance

 

 

(servicing) instructions in the literature accompanying the appliance.

 

 

INFORMATION - This equipment has been tested and found to comply with

 

 

limits for a Class A digital device, pursuant to part 15 of the FCC Rules & CE Rules.

 

 

These limits are designed to provide reasonable protection against harmful

 

 

interference when the equipment is operated in a commercial environment.

 

 

This equipment generates, uses, and can radiate radio frequency energy and, if

 

 

not installed and used in accordance with the instruction manual, may cause

 

 

harmful interference to radio communications.

 

 

Operation of this equipment in a residential area is likely to cause harmful

 

 

interference in which case the user will be required to correct the interference at

 

 

their own expense.

 

 

WARNING - Changes or modifications not expressly approved by the

 

 

manufacturer could void the user’s authority to operate the equipment.

Intense Light Miniature Turret Camera

CAUTION : To prevent electric shock and risk of fire hazards:

 

 

Do NOT use power sources other than those specified.

 

CILT00T6B

This installation should be made by a qualified service person and

 

 

 

CILT00T6W

should conform to all local codes.

 

 

 

 

 

 

 

1 Speco Technologies

 

2 Speco Technologies

1. Precautions

 

 

 

 

 

 

2. Safety Instructions

 

 

 

 

 

 

 

Precautions for use

 

Do not install the camera in

 

Do not install the camera under

 

Do not touch the front lens of the

 

extreme temperature conditions.

 

unstable lighting conditions.

 

camera.

• This camera should be installed by qualified personnel only

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

• There are no user serviceable parts inside

 

 

 

 

 

 

 

 

• Do not disassemble this camera other than to make initial adjustments

 

 

 

 

 

 

 

 

• Use a UL approved regulated 12 volt DC power supply

 

 

 

 

 

 

 

 

• Use appropriate low voltage power cable to prevent fire or electrical shock

 

 

 

 

 

 

 

 

• Please insure that your installation area can support the weight of the camera

 

Only use the camera under conditions

 

Severe lighting change or flicker can

This is one of the most important parts of

 

 

 

where temperatures are between

 

cause the camera to work improperly.

the camera. Be careful not to leave

 

 

 

-10°C and +50°C. Be especially careful to

 

 

 

 

fingerprints on the lens cover.

 

 

 

provide ventilation when operating under

 

 

 

 

 

 

Please handle this camera carefully

 

high temperatures.

 

 

 

 

 

 

 

 

 

 

 

 

• Do not use a strong or abrasive detergent when cleaning the camera

 

Never keep the camera pointed

 

Do not drop the camera or subject

 

Do not expose the camera to

 

directly at strong light.

 

it to physical shocks.

 

radioactivity.

• Do not install near cooling or heating device

It can cause malfunctions to occur.

Severe lighting change or flicker can

If exposed to radioactivity the CCD

 

cause the camera to work improperly.

will fail.

NOTE

*If the camera is exposed to spotlight or object reflecting strong light, smear or blooming may occur.

*please check that the power satisfies the normal specification before connecting the camera.

3 Speco Technologies

4 Speco Technologies

Page 1
Image 1
Speco Technologies CILT00T6B, CILT00T6W user service Precautions Safety Instructions, Precautions for use