Speco Technologies CVC230HZ installation manual - page 8

1 28

2) Connecting to Power

Each model has a different power input specification.

Please check the model type and standard power requirement before connecting to power.

+ Communication Control Connector Pin Description.

   

Contents

Main Page Page Page Back Page Page Page MAIN SETUP MENU Use the six buttons on back of the camera 1. Press the SET button to access the main setup mode. - Main setup menu is displayed on the monitor screen 2. Select the desired feature using the UP or DOWN button. Use this feature to designate a name for the camera, which will display on the monitor screen. 3. Press SET button. 4. You can enter up to 20 characters. 5. Select on screen position of the CAM TITLE. 6. When completed, move the cursor to END and press SET button. The three white balance control modes are as follows : Page Page Page Page Page Page Page Page - PRESET NO : Up to eight different preset configurations are supported. - PRESET MODE : Configure initial settings under FOCUS, EXPOSURE, etc. - PRESET SAVE : Save configured preset. - PRESET CLEAR : Clear configured preset. - END : Revert to the SPECIAL SETUP menu. Page Page IMAGE ADJ : Includes image quality or special function factors.