Speco Technologies HITSD10X DIP SWITCH SETTING

A-3. PROTOCOL

th~8th dip switches are used for Protocol Setting.

Factory Default: Pelco-D or Pelco-P ( Auto detection)

DIP SW1- 7 DIP SW1- 8

OFF OFF Pelco-D or Pelco-P

A-4. BAUD RATE SETTING

The 9

th Dip Switch is used for BAUD RATE setting.

DIP SW can be changeable to 2400bps, 9600bps.

Factory Default: 2400bps.

DIP SW1 9th BAUD RATE

OFF 2400

ON 9600

A-5. 485 TERMINATIONS

10th Dip Switch is used for 100Ω termination.

Set on 10th Dip Switch only for the last looped camera from the controller.

Even in case of only one camera, set on 10th Dip Switch of the cameras.

DIP SWITCH SETTING

Contents

Main HTSD10X 10X Pan-Tilt Speed Dome Camera CONTENTS WARNING & CAUTION Warning Whats in the Box ? GENERAL FEATURES 100X Zoom Mini Speed Dome 0.02 dome system accuracy 360 Endless Rotation Compensation function: preset position NAMES OF EACH PART INSTALLATION 6 A. CONNECTION METHOD A-1 INSTALLATION B. MOUNT QUICK OPERATING KEYS 8 1-64 + preset and 101~200 + preset are used for preset and 65-100 + preset used for functions. <Quick Operation Key Table 1, Pelco - D, P> DIAGNOSTIC QUICK OPERATING KEYS A. OSD MENU TABLE B. Dome Setup B-1. OSD MENU SETTING B-2. B-3. B-4. B-5. B-8-2. B-8-3. B-8-4. DEFAULT SETTING B-8-5. DEFAULT SETTING B-9. B-10. C. CAMERA SET C-1. C-2. C-3. C-4. C-6. C-7. C-8. C-9. C-10. D. PRESET SET D-1. D-2. D-3. E. AUTO SCAN SET F. TOUR SET F-1. F-2. F-3. G. PRIVACY SET G-1. G-2. G-3. G-4. H. PATTERN SET I. ALARM SET I-1. I-2. I-3. I-4. J. SECTOR SET J-1. J-2. J-3. J-4. A-1. DIP SW SETTING A-2. ID SETTING DIP SWITCH SETTING A-3. PROTOCOL A-4. BAUD RATE SETTING A-5. 485 TERMINATIONS TROUBLE SHOOTING SPECIFICATIONS 28 MODEL HTSD10X DIMENSIONS MEMO