Speco Technologies HTB10X manual Feature, Configuration, Wall Mount Installation #1

HTB10X

◈FEATURE

1.Long visible range at night.(50m Max. indoors, 40m Max. outdoors)

2.This camera uses split glass technology to prevent IR light reflection.

3.This camera has a Varifocal IR lens to prevent focus drift under IR lighting.

4.The IR cut filter is removed at night to receive maximum available light.

5.This product is weather proof to resist rain, snow and other environmental factors. (IP65)

6.This product is made of corrosion-free materials to resist rust and corrosion for extended periods of time.

7.The built-in sunshield helps the camera produce clear pictures under a variety of lighting conditions.

8.Power & video cables are concealed for extra security. (Cable through the mount).

9.Unique bracket allows the camera to be fully adjustable from both wall and ceiling mounting positions.

10.Dual voltage operation. You can connect 24V AC or 12V DC regardless of polarity. The Line-Lock function is available when you use 24V AC power.

11.The IR output level is adjustable to suit any lighting condition.

12.High magnification zoom / Auto focus

-Max. 100X zoom is available.(Optical:10X, Digital:10X)

-It features “Auto focus" for maximum versatility.

13.DNR (Digital Noise Reduction)

By using this DSP chip and associated technology, the amount of low light noise has been significantly reduced, and the signal-to-noise ratio(S/N) as well as horizontal resolution has been improved, resulting in a clear and sharp image display even in the dark.

14.Privacy zoom masking (max. 32 zones/8 programmable zone per screen)

The privacy zone function makes it possible to mask specific areas of the scene from view.

15.Motion Detection (4 programmable zone per screen) You can transmit an alert signal when it detects motion of an object on the screen. This feature is useful when you have to monitor several screens simultaneously.

16.High resolution Horizontal Resolution of 560TV Lines: Clear image quality has been achieved by employing a 1/4" SONY Super HAD CCD with 410,000 pixels, which provides a horizontal resolution of 560 TV lines.

17.OSD (On Screen Display)

For easy adjustment of all features.

18.RS-485 control

RS-485 communication is available to control the camera OSD and lens

19.Day & Night function

The camera can distinguish between day and night and will make changes according to the conditions. It maintains the most suitable color in daytime and B/W at night.

◈CONFIGURATION

<Caution>

RS485 signal only-Do not apply power to this cable.

To avoid product failure, connect ORANGE wire to RS485A and WHITE to RS485B, Never do it backwards.

◈WALL MOUNT INSTALLATION #1

1.Make a hole Ø30mm in diameter for routing cable.

2.Using the mounting plate, drill four holes on the wall.

3.Insert the anchors.

4.Attach the screws.

◈WALL MOUNT INSTALLATION #2

1.Adjust horizontal angle.

1)Loosen the bolt to adjust the horizontal angle of the camera.

2)Use the WRENCH to tighten the bolt after adjusting the camera.

2.Adjust vertical angle

1)Loosen a bolt to adjust vertical angle of the camera.

2)Use the WRENCH to tighten a bolt after adjusting the camera.

◈CEILING MOUNT INSTALLATION #1

1.Make a hole Ø30mm in diameter for routing cable.

2.Using the mounting plate, drill four holes on the ceiling.

3.Insert the anchors.

4.Attach the screws.

◈CEILING MOUNT INSTALLATION #2

1.Adjust horizontal angle.

1)Loosen the bolt to adjust the horizontal angle of the camera.

2)Use the WRENCH to tighten the bolt after adjusting the camera.

2.Adjust vertical angle

1)Loosen the bolt to adjust the vertical angle of the camera.

2)Use the WRENCH to tighten a bolt after adjusting the camera.