Congratulations on your purchase of Speco Technologies’ 70/25 Volt Rock Speaker System!

The 70/25V Rock Speaker System continues Speco Technologies’ heritage of more than forty years of providing the highest quality of performance and reliability for residential and commercial sound applications.

Speco Technologies’ 70/25V Rock Speaker System was designed with the focus of making the contractor’s work as easy and time-efficient as possible.

With a realistic rock design, our fully weatherproof units converge strong specifications and installer-friendly features to bring sound seamlessly into a commercial outdoor environment without sacrificing any aesthetic beauty.

A stealth, easy select transformer wattage dial and 70/25 volt selector switch aids the contractor in an easy and time-efficient installation while security loops on each side of the speaker permit permanent securing to the ground, a necessity in public arenas.

Constructed of a high-end polymer, coupled with a fine-mesh, integrated grille, these speaker systems will provide countless years of performance and sound enjoyment to your outdoor listening environment for all occasions.

70/25V Rock Speaker Series Specifications:

Item Code: SP-RK65CB/T

6.5” 70/25V Brown Rock Speaker

Item Code: SP-RK65CG/T

6.5” 70/25V Granite Rock Speaker

Specifications:

6.5” Mica Cone Woofer with Rubber Surround 1” PEI Dome Tweeter

Frequency Response 90Hz-20KHz 40 Watt RMS/ 60 Watt Max 70/25V Transformer

Transformer Settings: 30/15/7.5/3.75 & 8 ohm Mounted Security Loops for Securing

Fully Weatherproof

Installing and Wiring Your Speakers:

Please follow the following directions for installing and wiring your 70/25V Rock Speaker System:

Installing:

It is important that before making any wire connections with your rock speaker that your power source, amplifier and/or receiver, is completely off!

First, determine the purpose that your Rock Speaker System will be used for by

determining whether it will be used in a 70 Volt, 25 Volt or 8 ohm application.

Turn the rock upside down and adjust the 25/70V selector switch in the recessed cavity to the desired setting so it will be matched to the speaker wiring coming from the amplification output from the power source.

Upon completing this task, determine which wattage tap best meets the sound need of the environment the speaker will be utilized in. A choice of 3.75 watts, 7 watts, 15 watts and 30 watts is provided with the higher wattage settings made available for louder sound environments. Upon making your selection, carefully turn the recessed transformer dial to the proper setting.

For an 8 ohm speaker requirement, turn the transformer dial to the 8 ohm indication. This automatically overrides the transformer within the unit and the Voltage Selector switch.

Wiring:

Once the wattage tap is determined for the speaker, the speaker must be wired. Each 70/25V Rock Speaker has a weatherproof, wrapped wire coming out of the bottom of the rock that branches and exposes a red positive wire and a black common wire at the end.

Connect the red positive wire to the positive wire coming from your amplification source by tightly twisting and intertwining the two positive wires together. Likewise, connect the black common rock speaker wire with the common wire running back to your amplification source by twisting them tightly together. After secure connections are made, use thick, weatherproof, electrical tape to completely cover the connections many times over thus protecting it from any weather elements and moisture.

For a commercial application where multiple speakers are required, the speaker wire must utilize a parallel run. Never use a series run with commercial speakers.

A completely weatherproof, 14 gauge, shielded UL listed wire is recommended for the connection of your rock speaker to your amplifier.

Many rock installers bury the speaker wires underground to keep them from view. Make sure that your connection is completely protected from any moisture by a thick wrapping of weatherproof electrical tape if this is your preference.

Page 1
Page 2
Image 2
Speco Technologies SP-RK65CG/T, SP-RK65CB/T 70/25V Rock Speaker Series Specifications, Installing and Wiring Your Speakers
Page 1

SP-RK65CB/T, SP-RK65CG/T specifications

Speco Technologies SP-RK65CG/T and SP-RK65CB/T are two exceptional surveillance camera systems designed to enhance security and monitoring capabilities for both residential and commercial applications. These models stand out in the market due to their advanced features, innovative technologies, and characteristic durability that ensure reliability in diverse environments.

One of the primary features of both models is their high-resolution video capture. Offering a 65-foot IR range, they provide clear night vision capabilities, allowing users to monitor areas even in low-light conditions. This capability is crucial for maintaining security during nighttime or in poorly lit areas, ensuring comprehensive coverage without compromising on clarity.

Both surveillance cameras are equipped with robust weatherproof housing, making them suitable for outdoor installations. With an IP66 rating, they can withstand exposure to various weather conditions, including rain, snow, and dust. This durability ensures that the cameras remain functional and effective in protecting property regardless of the environment's challenges.

In terms of installation flexibility, the SP-RK65CG/T and SP-RK65CB/T models come with versatile mounting options. They can be easily installed on walls or ceilings, providing extensive flexibility in placement to cover critical areas. The cameras also support a range of advanced connectivity options, allowing seamless integration with existing security systems.

Another notable characteristic is the user-friendly interface and compatibility with various mobile and desktop applications. This connectivity enables real-time monitoring from any location through smartphones, tablets, or PCs, offering users peace of mind and enhanced accessibility to their surveillance feeds.

The included motion detection technology adds an additional layer of security. Users can set specific areas to monitor for motion, receiving alerts when movement is detected. This feature minimizes false alarms and ensures that security personnel are informed of any potential threats promptly.

Overall, Speco Technologies SP-RK65CG/T and SP-RK65CB/T cameras are a testament to advanced surveillance technology, providing users with high-quality video, reliable performance, and intelligent features that work together to create a comprehensive security solution.
Top Page Image Contents