Link Quick Charger

The Link Quick Charger is designed to charge a single NiCd (Nickel Cadmium) or NiMH (Nickel Metal Hydride) Battery Pack (model PTS360) in 60-90 minutes.

Set up the Link Quick Charger by plugging the power supply into the Link Quick Charger and into an appro- priate wall outlet. A solid red LED above the empty charger slot indicates that the slot is idle and ready for use. If the LED does not light, check the power sup- ply and plug connection to the charger. If the charger appears to be plugged in correctly, make sure the wall outlet has power.

Do not place anything in the Link Quick Charger other than the Battery Pack for the Link Wireless Telephone. You might damage the contacts. Bent contacts can keep the Battery Pack from charging.

Using the Link Quick Charger

Remove the Battery Pack from the Link Wireless Telephone by sliding the Battery Pack down and off while pressing the Battery Pack release button on the back of the handset.

Place the Battery Pack in the charging slot by aligning the top of the Battery Pack with the tracks on the charg- ing slot then gently sliding the Battery Pack upward onto the charging slot. While the Battery Pack is in the charg- ing slot, the LED above the slot will indicate the status of the charging process and/or the Battery Pack.

LED Status Indicators

Solid Green — the Battery Pack is charging. The Link Quick Charger takes 60-90 minutes to fully charge a Battery Pack. If the NiMH Battery Pack is hot or cold when placed in the charger, it may take longer to charge.

Flashing green — the Battery Pack is fully charged and ready for use. You may leave a fully charged Battery Pack in the Link Quick Charger. However, if you remove a fully charged Battery Pack then replace it in the charger, the charger LED will be solid green until the charger determines that this Battery Pack is fully charged. It may take a few minutes to give the flashing green indication.

Solid red or flashing red — the Battery Pack in the charg- ing slot is no longer capable of retaining a charge and is not usable. If the Battery Pack will not charge, do not

continue to charge the Battery Pack. Dispose of it prop- erly and do not attempt to use it in the handset. Do not attempt to open or repair a defective Battery Pack.

Flashing red/green — there is a problem with either the Battery Pack or Link Quick Charger. It may mean the Battery Pack being charged is too hot or too cold. Allow the Battery Pack to stabilize at room temperature and try again. If the Battery Pack will not charge, do not contin- ue to charge the Battery Pack. Dispose of it properly and do not attempt to use it in the handset. Do not attempt to open or repair a defective Battery Pack. If several dif- ferent Battery Packs cause the charger to show a flashing red or red/green LED, the charger may not be working properly. To verify this, substitute another Link Quick Charger and repeat the operation that caused the failure. If the same Battery Pack lights a green LED when insert- ed in a different charger, the Link Quick Charger is faulty. Contact your service representative for assistance.

Flashing yellow — the Link Quick Charger is testing and conditioning the Battery Pack. This test/condition mode is automatically started every 11th cycle of the charger.

Testing the NiCd standard Battery Pack takes approxi- mately four hours; testing the NiMH high- capacity Battery Pack takes approximately eight to ten hours. To manually start the test, press the MODE button. To stop the test, press the MODE button. However, it is highly recommended that the test be allowed to complete.

Chargers operate in a 50° to 85° F (10° to 30° C) environ- ment. Do not expose them to freezing temperatures or direct sunlight.

The Link Quick Charger is only authorized for use in the U.S. and Canada.

Only use the original SpectraLink plug-in power supply.

Only use SpectraLink Battery Packs in this charger.

It is normal for the Battery Pack to become warm when charging.

Never use non-SpectraLink charging units as they could damage the Battery Pack.

Do not immerse the Link Quick Charger in water or other liquid. Do not pour liquids into the charging slots.

Do not dip the Battery Pack in water or throw into fire.

Recycle or dispose of Battery Packs according to local requirements.

Replacement Battery Packs are available from your supplier or servicing agent.

Battery Pack Bins — If a handset is to be used during the recharging cycle, fully charged Battery Packs must always be available. Therefore, it is recommended that a bin is available to collect discharged Battery Packs and a second bin for charged Battery Packs. Users can quickly replace their discharged Battery Pack with a charged one. An assigned person can recharge the Battery Packs and move them to the charged bin as they are recharged. It is also recommended that the bins be non-metallic and clearly labeled to identify whether they are intended for charged or discharged Battery Packs.

Link Quick Charger

©2005 SpectraLink Corporation P/N 72-0360-01 Rev. D Model # PTQ360

SpectraLink Corporation 5755 Central Avenue Boulder, CO 80301 303.440.5330 or 800.676.5465 www.spectralink.com

Page 1
Image 1
SpectraLink PTS360 manual Using the Link Quick Charger, LED Status Indicators

PTS360 specifications

The SpectraLink PTS360 is a robust, high-performance wireless handset designed specifically for voice communications in demanding environments. Built with the needs of various industries in mind, this device excels in settings such as healthcare, retail, and manufacturing, where seamless communication is crucial for operations.

One of the standout features of the PTS360 is its powerful voice quality. It employs advanced voice codecs and acoustic technologies to provide crystal-clear audio, even in noisy environments. This quality is crucial for ensuring that users can communicate effectively without misunderstandings, which can be vital in fast-paced scenarios.

The PTS360 is designed for durability, featuring a rugged construction that meets stringent military standards for toughness. Its hard-wearing exterior is resistant to drops and spills, making it an excellent choice for environments where devices are subjected to heavy use. Furthermore, its long battery life allows for extended shifts without the constant need for recharging, enhancing user convenience.

The PTS360 leverages the latest wireless technologies, operating on a secure wireless network that improves data transmission and reduces interference. This device supports both Wi-Fi and DECT protocols, allowing for flexible deployment options based on the specific requirements of the organization. The inclusion of multiple connectivity options not only enhances reliability but also boosts overall workforce efficiency.

Another significant characteristic of the PTS360 is its user-friendly interface. The handset features a large, easy-to-read display and intuitive controls that simplify navigation. Users can quickly access essential functions like contact lists and call logs, making the device accessible for employees at all levels of technical proficiency.

In addition to its communication capabilities, the PTS360 supports push-to-talk (PTT) features, enabling instant communication across teams. This feature is particularly advantageous in industries where rapid response is necessary, such as emergency services or hospitality.

For organizations prioritizing safety and compliance, the PTS360 includes features like alarm management and emergency notifications. These functionalities ensure that users can alert colleagues in critical situations, providing an additional layer of security in high-stakes environments.

In summary, the SpectraLink PTS360 is a sophisticated device that combines durability, superior audio performance, and user-friendly features. With its advanced wireless technologies and added safety functionalities, it stands out as an ideal solution for organizations looking to enhance their communication capabilities in demanding settings.