6.Set LOAD SIZE (WATER LEVEL) control. Use RESET if agitation has started and more water is needed.
IMPORTANT: Holding the LOAD SIZE (WATER LEVEL) control in the RESET position can cause flooding of the washer.
7.Select the cycle according to the type of fabric being washed.
Push the timer knob | in |
and turn clockwise to the |
|
desired cycle and wash time. |
|
8.Pull the timer knob out to start the water fill. Agitation will begin when the water reaches the level you selected.
The washer will stop (pause) for approximately two minutes before the wash and rinse spins. Do not turn the timer through these pauses. They are part of the cycle.
Soaking
Set the timer knob in the center of the word “RINSE” or the washer may spin without first filling with water. Place the soaking product and clothes load in the washtub. Pull timer knob to start water fill. After fill is completed and agitation has started, push the timer knob in. This will stop the washer. When the clothes have soaked the desired length of time, TURN THE TIMER KNOB TO THE START OF THE LAST SPIN, then pull the timer knob out to start the spin.
Timer
Although the washer cycles are automatic, the timer may be reset to lengthen, shorten, or repeat a portion of a cycle.
To set or reset the timer, push timer knob in to stop the washer. Hold timer knob in firmly while turning it clockwise to the setting desired. Pull timer knob out to start the washer.
12 | 36729 |