￿p ￿"’^ ￿dp›^F’

IMPORTANT: Before using your new washer, make sure the washer cord is plugged into a 120 Volt electrical outlet that has the proper grounding and polarity. Make sure the washer hoses are connected to the hot and cold water

4. Close the loading door. The washer will not agitate or spin with the loading door open.

W318IE0C

LOAD SIZE

EX-

LRG

6.Set LOAD SIZE (WATER LEVEL) control. Use RESET if agitation has started and more water is needed.

faucets, and that the faucets are turned on. Be sure the drain hose is not kinked and is inserted into a drain. See the INSTALLATION INSTRUCTIONS for details of proper washer installation.

IMPORTANT: Prior to first wash, use an all purpose cleaner, or a detergent and water solution, and a damp cloth to remove shipping dust from inside of washtub.

WARNING

To reduce the risk of serious injury, do not by-pass the loading door switch by permitting the washer to agitate or spin

with the loading door open.

W019E

5. Set WASH/RINSE temperatures.

IMPORTANT: Holding

CPW160B

the LOAD SIZE (WATER LEVEL)

control in the RESET position can cause flooding of the washer.

7.Select the cycle according to the type of fabric being washed. Push the timer knob in and turn clockwise to the desired cycle and wash time.

1. Get the clothes ready for

washing. Empty pockets and

 

cuffs. Sort items into separate

 

loads. Pretreat stains and

 

heavily soiled areas.

D305IE1A

 

2. Measure and add detergent to the

NOTE: Do not use a warm rinse with permanent press or other synthetic fabrics. A warm rinse can cause wrinkling in some garments. Cold rinses will save you money and energy and will help reduce wrinkling in permanent press and synthetics.

WASH / RINSE TEMP

WARM WARM

WARM COLD

HOT

COLD

COLD

COLD

CPW160A

washtub.

W395IE0A

3. Add clothes loosely into the washtub.

W281IE0B

When using the DELICATE cycle, a WARM rinse is not available. If the WASH/RINSE selector is set on WARM/WARM, it will still give a COLD rinse. This is to assure proper care of delicate items.

The Energy Saver settings, marked with an asterisk (*), show which temperature settings will use the least energy.

CPW160C

8.Pull the timer knob out to start the water fill. Agitation will begin when the water reaches the level you selected.

The washer will stop (pause) shortly before the wash and rinse spins. Do not turn the timer through these pauses. They are part of the cycle.

3

39496