Registration |
| The Handset Layout | |
|
|
|
|
Enter Base ID Code
1. After charging the Handset, remove it from its Charge Cradle, the screen will display:
1
2
3
2. Press NEW, then enter the 15 digit Base Unit ID code, located on the underside of the Base Unit.
3. Press OK. The Handset will display:
PLEASE WAIT!!
4. Wait approximately 15 seconds. The Handset will display:
FOUND BASE
NOTE: Occasionally, it will take longer than 15 seconds for the Handset to find the Base Unit. This is normal.
If the Handset displays: BASE BUSY TRY LATER, this indicates that the system is in use. Wait until the Base Unit is in the idle (on hook) mode, and repeat step 2 to 4.
Congratulations! You can now enjoy the benefits of your
4
9
5
10
6 | 11 |
| 7 | 12 |
| 8 | 13 |
| 14 | |
|
| 15 |
1. | Antenna | 9. LCD Display |
2. | Message Waiting Indicator | 10. Select |
3. | Earpiece | 11. Off (Clear) |
4. | Headset Jack (2.5mm) | 12. Battery Compartment |
5. | Scroll Keys | 13. Billed Services |
6. | On (Flash) | 14. Intercom |
7. | Dialing Key | 15. Microphone |
8. | Handsfree Speakerphone |
|
6 | 7 |
