Unbundled Dark Fiber
Loop Orders (Continued)
Table 5 provides the appropriate location information by Route Type.
Table 5 – Route Type Information
| Route Type | Location Z | Location A |
2) | Central Office to an | POI CLLI at the CO (CLLI Z) | |
premises located FPP (loop) |
|
| |
3) | Central Office to remote (feeder | POI CLLI at the CO (CLLI Z) | POI CLLI at the OSP |
subloop) |
| (CLLI A) | |
4) | Remote to remote (distribution | POI CLLI at the OSP (CLLI Z) | POI CLLI at the OSP |
subloop) |
| (CLLI A) | |
5) | Remote to an | POI CLLI at the OSP (CLLI Z) | |
located FPP (distribution subloop) |
|
|
Service Tab
In IRES, entries are required in the ACTL and APOT fields on the Service tab when two CLLI codes are required (Route Types 3 and 4). When one CLLI code and one address are required (Route Types 2 and 5), the only field requiring an entry is the ACTL field.
In addition, entries are required in the NC, NCI and SECNCI fields on the Service tab. Table 6 provides the codes for loop Route Types 2, 3, 4 and 5.
Table 6 - Codes
| Route Type | NC | NCI | SECNCI |
2) | Central Office to an | 01QBF.LLX | 01FCF.X | |
(loop) |
|
|
| |
3) | Central Office to remote (feeder subloop) | 01QBF.LLX | 01QEF.X | |
4) | Remote to remote (distribution subloop) | 01QEF.X | 01QEF.X | |
5) | Remote to an | 01QEF.X | 01FCF.X | |
(distribution subloop) |
|
|
|
Figure 8 illustrates the required entries described above. The remaining fields highlighted on the Service tab should be completed with standard entries.
10/02 Version 1 | Copyright 2002 Sprint Communications Company | 10 |