SPX Cooling Technologies manual Marley Sigma F Series CoolingTower, Durable Marley Geareducer

/ Marley Sigma F Series CoolingTower /

Durable Marley Geareducer®

—the industry quality standard. Designed to meet or exceed the requirements of CTI STD-111 and AGMA STD 420.4, and run- in under load prior to shipment.

5-year warranty assures trouble-free operation.

Non-skid Fan Deck

of interlocking pultruded panels, with fasteners concealed by the adjacent panel, offers a clean surface free of trip hazards.

Corrosion Resistant

pultruded fiberglass structural components and fan deck panels, FRP endwall casing and stainless steel hot water basins are all impervious to a broad range of corrosive materials.

Simple Maintenance

Each Geareducer is equipped with a stainless steel lubrication line terminating outside the fan cylinder, near the motor, at an oil level sight glass and drain. Low profile allows for easier access to equipment.

High-Performance Film Fill

Marley MX film fill removes process heat efficiently, predictably. Integrally molded drift eliminators and louvers virtually eliminate drift spotting nuisance and help operation even in extremely cold weather.

Internal Piping Arrangement

enhances tower appearance and allows balanced distribution and flow.

Marley Spiral Target Nozzles

Injection molded polypropylene with a diffuser and snap-in orifice cap offer a wide range of adjustment in flow rates and basin water levels; even distribution over the fill area.

7401 WEST 129 STREET OVERLAND PARK, KANSAS 66213 UNITED STATES 913 664 7400 spxcooling@spx.com spxcooling.com

In the interest of technological progress, all products are subject to design and/or material change without notice. ©2008 SPX Cooling Technologies, Inc. Printed in USA

SP-SF-C