ASSEMBLY INSTRUCTIONS

STEP 7

Run the CONNECTION WIRE(25) through the hole in the plate on the HANDLEBAR(5). Attach the HANDLEBAR(5) to the UPRIGHT(4) with BUTTON HEAD BOLT(M8x1.25x30mm)(42) and ROUND HEAD

SCREWS(M6x1x8mm)(49).

STEP 8

Install two AA batteries into the METER(24), two batteries included. See page 13 for detailed battery installation instructions. Plug the CONNECTION WIRE(25) to the METER(24), and push the excess wires back into the UPRIGHT(4). Place the METER(24) onto the plate on the HANDLEBAR(5) and secure with ROUND HEAD

SCREWS(M5x0.8x15mm)(48).

NOTE: Be careful not to damage the wires when attaching the METER(24).

10

Page 10
Image 10
Stamina Products 1300 owner manual SCREWSM6x1x8mm49