ASSEMBLY INSTRUCTIONS

STEP 4: The two LEGS(7) with a Warning Label must

 

be on opposite sides of the INMOTION trampoline.

 

Screw one of the LEGS(7) with a Warning Label onto

 

a threaded connector on the rail frame. Attach the other

Warning

LEG(7) with a Warning Label to the threaded connector

Label

directly opposite the other LEG(7) with a Warning

 

Label. Screw the other four LEGS(7) onto the threaded

 

connectors on the rail frame. Refer to illustration 4.

 

!WARNING: The SAFETY PAD(6) must be securely attached to the frame before using the trampoline. It must be properly positioned as shown in illustration 5.

STEP 5: Place the trampoline in the normal use position. Make sure that the SAFETY PAD(6) covers the Springs on the INMOTION trampoline. Stand on the trampoline to make all six legs set flat on the floor. Refer to illustration 5.

STEP 6: Post the USE INSTRUCTIONS SIGN(16) in a highly visible and safe location. The USE INSTRUCTIONS SIGN(16) shall be placed such that it will be readily visible to the intended viewer.

4.

Warning

Label

5.

CORRECT PLACEMENT OF

SAFETY PAD

8

Page 8
Image 8
Stamina Products 35-1650F owner manual Correct Placement Safety PAD