HARDWARE IDENTIFICATION CHAT
This chart is provided to help identify the hardware used in the assembly process.
After unpacking the unit, open the hardware bag and make sure that you have the following items:
| 3/16" |
| 1/4" | 5/16" |
| 3/8" |
| 1/2" |
|
|
|
|
|
| |
|
|
|
|
|
|
|
|
|
|
| INCHES |
|
|
| |
0 | 1/2 |
| 1 | 1/2 | 2 | 1/2 |
| 3 | 1/2 | 4 | 1/2 | 5 | 1/2 | 6 in. | |
0 | 10 | 20 | 30 | 40 | 50 | 60 | 70 | 80 | 90 | 100 | 110 | 120 | 130 | 140 | 150 mm. |
MILLIMETERS
6 | 8 | 10 | 12 |
Place washers, the end of bolts or screws on the circle s to check for the correct size. Use the small scale to check the sizes of bolts and screws.
NOTICE: The length of all kinds of screws a nd bolts are not included themselves head, except the flat head screws and bolts.
length 
length 
Part No. and Description | Qty | |
38 | Bolt, Hex Head (M10 x 1.5 x 20mm) | 4 |
39 | Bolt, Hex Head (M12 x 1.75 x 70mm) | 2 |
40 | Bolt, Button Head (M6 x 1 x 15mm) | 2 |
44 | Arc Washer (M6) | 2 |
47 | Washer (M10) | 4 |
48 | Washer (M12) | 2 |
NOTE: 1. Some of the hardware items listed may be attached to other parts.
2. Bolt length is measured from the bottom of the bolt head to the end of the bolt.
5
