Stamina Products 55-4700, Aero Pilates Premier Studio STEP 9, STEP 10

ASSEMBLY INSTRUCTIONS

(53) Front Stand

( Wider )

(55) Rear Stand

( Narrower )

Slots

STEP 9

Insert the FOAM PAD ASSEMBLIES(16) into the holes located on the CARRIAGE(7). Place the HAND

STRAPS(20) onto the FOAM PAD ASSEMBLIES(16) for storage.

STEP 10

Refer to the inset drawing. To prevent the CARRIAGE(7) from moving while placing the AeroPilates

Premier Studio onto its stand, attach one of the TENSION CORDS(10) in the slot on the FRONT FRAME(1).

Place the AeroPilates Premier Studio onto the stand as shown in the illustration.

NOTE: The rubber feet of the AeroPilates Premier Studio must fit into the FRONT STAND(53) and the

REAR STAND(55). The FRONT STAND(53) is wider than the REAR STAND(55). The footbar end

of your AeroPilates Premier Studio will fit into the top of the FRONT STAND(53) and the headrest

end of your AeroPilates Premier Studio will fit into the REAR STAND(55).