ASSEMBLY INSTRUCTIONS
STEP 2
Remove your AeroPilates Performer XP615 from its packaging placing the product on its side, with the LOCKING PIN(30) side upward. Remove the LOCKING PIN(30) and unfold the MAIN FRAME ASSEMBLY separating the half that has the attached LOCKING PIN(30). When completed, the frame should be separated approximately three feet at the end.
STEP 3
Attach the four RUBBER FEET(29) to the FRONT FRAME(1) and REAR FRAME(2) with ROUND HEAD SCREWS(M5x0.8x25mm)(41). Attach the WHEELS(28) onto the FRONT FRAME(1) with WASHERS(M8) (51) and NYLOCK NUTS(M8x1.25)(47).
STEP 4
Unfold your AeroPilates Performer XP615 to a flat position by moving the FRONT FRAME(1) away from the platform end of the product in a clockwise position until fully extended.
7
