SECTION 1
DESCRIPTION OF EQUIPMENT
INTRODUCTION
This manual provides information on the installation and operation of the VersiVision FVT1000/FVR1000 Series Fiber Optic Video Modems. Section 1 contains a general description of the equipment. Section 2 contains installation instructions. Section 3 contains maintenance and troubleshooting information.
Model | Description | |
Number | ||
| ||
|
| |
FVT1003 | Transmitter; | |
FVT1004 | Transmitter; | |
FVT1005 | Transmitter; | |
|
| |
FVR1003 | Receiver; | |
FVR1004 | Receiver; | |
FVR1005 | Receiver; | |
|
| |
FVR1003M | Receiver module; | |
Multimode; ST; 3km; installed in Model FVC14 chassis | ||
| ||
FVR1004M | Receiver module; | |
Singlemode; SC; 3km; installed in Model FVC14 chassis | ||
| ||
FVR1005M | Receiver module; | |
Singlemode; SC; 30km; installed in Model FVC14 chassis | ||
|
DESCRIPTION OF EQUIPMENT
Functional Characteristics
The VersiVision FVT1000/FVR1000 Series products are fiber optic video links designed to extend a frequency modulation (FM) video signal over a single fiber optic cable. These modems provide high quality transmission of one channel simplex video at distances to 3km using multimode fiber and distances to 30km using singlemode fiber. A BNC connector provides the copper interface for the video input/output. ST and SC optical connectors are standard for the fiber optic interface. The FVT1000 and FVR1000 modems are completely compatible with the NTSC, PAL, or SECAM video standards.
VERSITRON FVT1000 and FVR1000 Series Fiber Optic Video Modems utilize APC circuitry while maintaining stable optical power output. The fiber optic link established between the transmitter and receiver devices insures immunity from EMI, RFI, and ground loops. AD, Pelco, Phillips, and Vicon communication protocols are supported. The modems’ plug and play design requires no user adjustments. LED status indicators include video sync present (VIDEO) and power on (POWER).
4