Standard Horizon GX3500S - page 57

Page 57GX3500S
11.8.2 Transmitting a DSC Position Send Call
Pre-Programmable Calling
1. Press the [CALL(MENU)] key. The “DSC Operation”
menu will appear in the display.
2. Turn the CHANNEL selector knob to select the “POS
Send.”
3. Press the [ENT] key to select the Individual directory.
4. Turn the CHANNEL selector knob to select a name
in the directory, then press the [ENT] key.
5. Press the [ENT] key to send your position to the se-
lected vessel.
Manual Calling
You may enter an MMSI number manually to contact without the Setting up the
Individual / Position Call Directory.
1. Press the [CALL(MENU)] key. The “DSC Operation”
menu will appear in the display.
2. Turn the CHANNEL selector knob to select the “POS
Send.”
3. Press [ENT] key to show the Position Send directory.
This directory uses the INDIVIDUAL Directory infor-
mation.
4. Turn the CHANNEL selector knob to select “Manual,”
then press the [ENT] key.
5. Enter the MMSI number (eight digits) which you want
to contact by the keypad, then press the [ENT] key.
6. Press the [ENT] key to send your position to the se-
lected vessel.