Page 53Phantom PS2000
12.8 SCAN TYPE
This selection selects the scan mode between “Memory Scan” and “Priority
Scan.”
1. Press and hold down the [CALL(SET)MENU] key until
RARIO SETUP” menu appears.
2. Press the [CALL(SET)MENU] key, then press the [] or
[] key to select “SCAN TYPE” menu.
3. Press the [CALL(SET)MENU] key.
4. Press the [] or [] key to select “MEMORY” or “PRIOR-
ITY.”
5. Press the [CALL(SET)MENU] key to store the selected set-
ting.
6. Press the [16/9] key to return to radio operation.
12.9 SCAN RESUME TIME
This selection is used to select the time the PS2000 waits after a transmission
ends before starting scanning.
1. Press and hold down the [CALL(SET)MENU] key until
RARIO SETUP” menu appears.
2. Press the [CALL(SET)MENU] key, then press the [] or
[] key to select “SCAN RESUME” menu.
3. Press the [CALL(SET)MENU] key.
4. Press the [] or [] key to select the desired resume time.
The resume time can be set to “3 (3 seconds),” “2 (2 sec-
onds),” “1 (1 seconds),” or “oF (off).” In the “oF (off)” selec-
tion, the scanner will resume after the other station stops
transmitting (carrier drops).
5. Press the [CALL(SET)MENU] key to store the selected set-
ting.
6. Press the [16/9] key to return to radio operation.