TABLE OF CONTENTS |
|
WARRANTY (SEE BELOW UNDER “IMPORTANT”) | 3 |
SAFETY SYMBOLS | 4 |
SAFETY PRECAUTIONS | 5 |
TOOL STICKERS AND TAGS | 6 |
HOSE TYPES | 7 |
HOSE RECOMMENDATIONS | 8 |
HTMA REQUIREMENTS | 9 |
OPERATION | 10 |
SETUP AND TEST | 10 |
OPEN CENTER/CLOSED CENTER SETUP | 10 |
DIE INSTALLATION | 10 |
TOOL PROTECTION & CARE | 14 |
TROUBLESHOOTING | 15 |
SPECIFICATIONS | 16 |
CT04 ILLUSTRATION | 17 |
CT04 PARTS LIST | 18 |
IMPORTANT
To fill out a Product Warranty Validation form, and for information on your warranty,
visit Stanleyhydraulics.com and select the Company tab, Warranty.
(NOTE: The warranty Validation record must be submitted to validate the warranty).
SERVICING: This manual contains safety, operation, and routine maintenance instructions. Stanley Hydraulic Tools recommends that servicing of hydraulic tools, other than routine maintenance, must be performed by an authorized and certified dealer. Please read the following warning.
WARNING
SERIOUS INJURY OR DEATH COULD RESULT FROM THE IMPROPER REPAIR OR
SERVICE OF THIS TOOL.
REPAIRS AND / OR SERVICE TO THIS TOOL MUST ONLY BE DONE BY AN
AUTHORIZED AND CERTIFIED DEALER.
For the nearest authorized and certified dealer, call Stanley Hydraulic Tools at the number listed on the back of this manual and ask for a Customer Service Representative.
CT04 User Manual ◄ 3
