TABLE OF CONTENTS & FEATURES
EZ OPTIONS
TABLE OF CONTENTS | Page |
| Page |
|
| ||
EZ Hardware Features | . . . .2 | HZ Trims | . . . .4 |
EZ Software Features | . . . .2 | KZ Specifications | . . . .5 |
EZ Options | . . . .2 | KZ Functions | . . . .6 |
Patented Keying | . . . .3 | KZ Trims | . . . .6 |
EZ Accessories | . . . .3 | EXZ Specifications | . . . .6 |
HZ Specifications | . . . .3 | Order Procedure | . . . .7 |
HZ Functions | . . . .4 |
|
|
HARDWARE FEATURES
•
•When the deadbolt is projected, deadbolt sensing prevents access by unauthorized PIN’s. (Key override feature standard on Keypad EZ.)
•Mechanical override allows for emergency access.
•Available in common finishes and trims to match BEST’s 9K cylindrical series and 40H mortise series, providing aesthetic continuity.
•Available in cylindrical, mortise, and exit device trim platforms to meet most common applications.
•12 position keypad design with audible and visual feedback.
•Standard battery pack yields a minimum of 65,000 cycles /
•Optional extended battery pack yields twice the battery life as the standard battery pack.
•Local
•Replacement parts available.
•Features BEST’s standard 3 Year warranty.
•
•Remote unlock standard.
Keypad EZ
SOFTWARE FEATURES
•Variable PIN length from 3 – 6 digits.
•Maximum of 50 users.
•All programming occurs through the keypad.
•Passage Mode privilege – authorized users can unlock device for extended periods of time.
•Deadbolt Override privilege – authorized users can gain access even when a mortise deadbolt is thrown.
•Provides for 1 Administrator PIN and 5 Supervisor PIN’s to allow easy management of groups of users.
EZ OPTIONS
AL– Besides complying with a wide variety of accessibility codes and ordinances, Best Access Systems lever handles are available with a special abrasive feature. Abrasive strip on the lever immediately identifies warnings on doors to hazardous areas for the blind.
EXBB– Extended life battery pack for double the operating life. (93KZ & 45HZ ONLY)
LM– Lost motion feature allows the lever handle to move 45 degrees from parallel to the horizontal plane without engaging the latchbolt assembly. When the lockset is in the locked mode, this feature makes
Note: Available in #15 lever style only. (Cylinder not supplied).
SH– Security head provided for all exposed screws. Thick
TL– Tactile levers may be used in areas where improved grip is required or as a warning in hazardous or Safety First areas. Grooves are machined into the back of the hand grasp portion of the lever to improve grip and/or provide a sensory warning. This option can be used for blind, safety, or accessibility applications.
2 | E L E C T R O N I C |
|