| TABLE OF CONTENTS |
SAFETY SYMBOLS | 4 |
SAFETY PRECAUTIONS | 5 |
TOOL STICKERS & TAGS | 6 |
HOSE TYPES | 7 |
HOSE RECOMMENDATIONS | 8 |
FIGURE 1. TYPICAL HOSE CONNECTIONS | 8 |
HTMA REQUIREMENTS | 9 |
OPERATION | 10 |
TOOL PROTECTION & CARE | 11 |
TROUBLESHOOTING | 12 |
FIGURE 2. CHARGING THE ACCUMULATOR | 13 |
CHARGING THE ACCUMULATOR | 13 |
SPECIFICATIONS | 14 |
ACCESSORIES | 14 |
SPECIAL TOOLS | 14 |
SD67 PARTS ILLUSTRATION | 15 |
SD67 PARTS LIST | 16 |
IMPORTANT
To fill out a Product Warranty Recording form, and for information on your warranty,
visit Stanleyhydraulic.com and select the Warranty tab.
(NOTE: The warranty recording form must be submitted to validate the warranty).
SERVICING THE STANLEY HYDRAULIC SPIKE DRIVER. This manual contains safety, operation, and routine maintenance instructions. Stanley Hydraulic Tools recommends that servicing of hydraulic tools, other than routine maintenance, must be performed by an authorized and certified dealer. Please read the following warning.
WARNING
SERIOUS INJURY OR DEATH COULD RESULT FROM THE IMPROPER REPAIR OR SERVICE OF THIS
TOOL.
REPAIRS AND / OR SERVICE TO THIS TOOL MUST ONLY BE DONE BY AN AUTHORIZED AND
CERTIFIED DEALER.
For the nearest authorized and certified dealer, call Stanley Hydraulic Tools at the number listed on the back of this manual and ask for a Customer Service Representative.
SD67 User Manual ◄ 3
