Stanton C.402 Scanning Fast forward/Fast backward, Time display, Operations, MP3 MODE, Cd Mode

OPERATIONS

8.Scanning (Fast forward/Fast backward)

Scanning is a function for moving quickly forward or backward in the track when the				or	button is pressed.
The scanning speed depends on how long you hold the button.
Press and hold the	or	to begin scanning. The disc moves rapidly forward or backward and the sound is
played. The current scan point is indicated on the LCD.
Press and hold the	to scan in the forward scanning,		to scan in the reverse scanning.

9. Time display

MP3 MODE

Press TIME button to select time display MP3 mode:

(1)Elapsed time of a track.

(2)Remaining time of a track.

ELAPSED

REMAIN

Figure 9-1

CD MODE

Press this button to select the time display .

It switches between the elapsed time and remaining time and total remaining time of the disc.

ELAPSED

TOTAL

REMAIN

REMAIN

Figure 9-2

10.Matching the Beats Per Minute (BPM)

There are three tools available for matching the BPM :

(1)Use the pitch slider to adjust the BPM statically.

(2)Use the PITCH BEND buttons to change the BPM temporarily.

(3)Use the JOG WHEEL to change the BPM temporarily.

1)Pitch Slider

(1)To adjust the BPM by sliding the pitch slider up or down, you must first press the PITCH button to turn on the Pitch Slider.

(2)Slide the pitch slider up to decrease BPM, or down to increase BPM. The adjustment range is switchable from +/- 4%,+/-8% to +/-16%.

2)Pitch Bending

The BPM increases or decreases respectively while the PITCH BEND+ or PITCH BEND- button is pressed.

The BPM increase depends on how long you hold the button. If you hold the button for about 1/2 second, the BPM will go either to +16% for PITCH BEND+ or -16% for PITCH BEND-. If you tap the button, the BPM will only change a little so you can change the beat slightly without audible changes in the music.

The CD will return to the tempo indicated by the Pitch slider when you let go of the PITCH BEND + or - button.

9