1. Master level control: Controls the overall signal output level of the Master output
2. Mic volume control: Controls the overall microphone output level
3. Microphone input: 1/4” connector
4. Input selector switches: Selects phono or line inputs of channels 1 and 2
5. Channel faders: Control the output level of channels 1 and 2
6. Crossfader Reverse: Reverses the direction of the crossfader
7. Crossfader: Fades the master output between channels 1 and 2
8. Level meter: The level meter displays the master output stereo signal level
9. Power switch: Selects power "ON" or "OFF"
10. Power Indicator: LED indicates whether mixer is ON or OFF.
11. Cue pan: Fades the headphone output between channels 1 and 2, effectively allowing
the user to preview a mix.
12. Cue level control: Controls the overall headphone output level.
13. Headphone output: Connection for 1/4 inch headphone. Recommended
headphone impedance is 32-200 ohms for maximum volume
14. Ground connector: Connects to the turntable ground connector to eliminate electrical
hum. Ground cables are usually supplied with turntables
15. Line inputs: Line signal inputs for channels 1 and 2
16. Phono inputs: Phono signal inputs to connect turntables to channels 1 and 2
17. Master output: Level is controlled by master level control (1)
18. REC output:
Record out connects to tape recorder, mini disk recorder, etc. to
record performance
19. Power supply connector: Input connection for the accompanying power supply.
D E S C R I P TI ON O F FU N C TI O N S