MIXER CONTENTS 14. Grounding post - for turntable connection.
Always use this connection when using
standard turntables with ground cable.
(Some turntables like the T.80 / T.120 do
not require grounding wire).
15. Phono Inputs – Plug your turntables in here.
When these connectors are used, your
signal is fed directly to the high-quality RIAA
phono pre-amplifiers. Use this position only
for turntables. Line level sources will
overload the sensitive phono pre-amps and
will cause distortion.
16. Line Inputs - Unbalanced RCA jacks for connecting stereo audio from line level sources such as CD
players, HiFi VCRs, cassette decks, DAT machines, laser discs, tuners, even synthesizers or other
mixing consoles.
NOTE: Plug mono audio sources into both Left and Right inputs using a "Y" cable connector.
17. Master Output - Unbalanced RCA connectors controlled by the Master level.
18. Power Switch – turns unit off and on. Note*** Remember to turn ALL volume levels down when
turning on/off the unit.
19. Power Connector - Plug in the included power supply here.
19 17 16 15 1 4
18