Stanton M.212 user manual Specifications

SPECIFICATIONS

Input / output impedance & sensitivity: (Master 0 dBV output, load= 100k ohm, Max, Gain, EQ flat)

Line 10k ohm /-14 dBV (200 mV) +/-2 dB

Phono 47k ohm /-50 dBV (3.16mV) +/-2 dB

Mic 2.2k ohm /-60 dBV (1mV) +/-2 dB

Master 1k ohm

Phones 33 ohm / 0 dBV (1V) ±2 dB

Max. output (THD= 1%, Maximum gain, EQ flat)

Master	More than +18 dBV (8.0V) at load= 100k ohm
Phones	More than +4 dBV (1.6V) at load= 32 ohm
Channel balance: Within 3 dB
Frequency response: (Master output, EQ flat)
Line	20-20 kHz +/- 2 dB
Phono	20-20 kHz +2, -3 dB (RIAA)
Mic	20-20 kHz +2/-3 dB

S/N ratio: (Maximum gain, master 0 dBV output, EQ flat, w/20 kHz LPF, A-weighted)

Line	Less than -80 dBV
Phono	Less than -70 dBV
Mic	Less than -60 dBV

THD + N: (Master 0 dBV output, maximum gain, w/ 20 kHz LPF)

Line	Less than 0.05% 20 - 20 kHz
Phono	Less than 0.1% 20	- 20 kHz (IEC-A WTD)
Mic	Less than 0.2% 20	- 20 kHz (IEC-A WTD)
Phones	Less than 0.1% 20	- 20 kHz (From line input)

Crosstalk: (From master output, A-weighted)

Line/Phono	More than 70 dB at 1 kHz between L and R
	More than 70 dB at 1 kHz between channels
MIC EQ:
Hi	10 +/- 2 dB at 10 kHz
	-10 +/- 2 dB at 10 kHz
Low	10 +/- 2 dB at 100 Hz
	-10 +/- 2 dB at 100 Hz
Channel EQ:
Hi	9 +/- 2 dB at 13 kHz
	-15 +/- 3 dB at 13 kHz
Mid	9 +/- 2 dB at 1 kHz
	Less than -23 dB at 1 kHz
Low	9 +/- 2 dB at 70 Hz
	-26 +/- 3 dB at 70 Hz
Power Source:	DC 6V
Dimensions:	230 (W) X 267 (D) X 111 (H) mm
Weight:	1.65 kg

5